Xmtd-2001 Pid Digital Display Temperature Controller K E PT100 Thermocouple 220AC 75*75mm Thermostat

Product Description

Product Description

XMTD-2001 series temperature controller applies special technique to resist interference and adopts ON/OFF control. It has high precision,good reliability,strong cushioning,easy installation and so on. This controller is widely used as temperature measurement and control automatically in light and heavy industry, such as metallurgy,chemical,electronic,
machinery,textile,plastic,refrigeration,medical treatment,electric oven, and so on.

Specifications

XMT* digital temperature controller meter
Display method: LED display
Basic error: Less than 1.0%F.S±1B
Output contact capacity: AC 220V 5A



Meaning of the model code




 Connection scheme(consult)
1. Terminal No.1 is connected with anode(+) of J type thermocouple sensor and terminal No.2 is connected with negative pole (-) of J type thermocouple sensor.         
2. Terminal No.4 and No.5 has been connected with NTC5K thermal resistance as cold compensation. 
3. Terminal No.6, No.7 and No.8 are relay output. When the green light of "OUT" brighten, terminal No.7 and No.8 are connected and terminal No. 6 and No.7 are disconnected. When the green light of "OUT" goes out, terminal No.7 and No.8 are disconnected and terminal No.6 and No.7 are connected.
4. Terminal No.9 and No.10 are power supply of AC85~242V.



 Panel instruction (consult)
1.The measured value display window                                              
2.Setting dial: Through press the "+" and "-" of each dial to set temperature set value.
3. Output indicator: The green light of "OUT" on the panel indicates the situation of output. When the 7.8 terminal of the meter connect, "OUT" green light is brighten.
4. "RST" potentiometer: When between the setting temperature and measurement temperature have static difference deviation, you can use this potentiometer for regulation.The potentiometer 
is setting in the middle in the factory.




Method to use

1. This temperature controller should be fixed in the installation hole. Connect the power, sensor and output controlling wires properly according to the connection scheme. It will display the actual measured temperature after switching on.
2. The dial button on the panel of the controller can be set to any temperature you want between 0ºC and 399ºC.
3.Control mode:
When the actual measured temperature don't enter the proportional band and the setting temperature is higher than the actual measured temperature, the terminal "7" and "8" connect , the terminal "7"  and "6" disconnect. The load starts heating at the moment and its temperature is going up. When the actual measured temperature don't enter the proportional band and the setting temperature is lower  than the actual measured temperature, the terminal "7" and "8" disconnect , the terminal "7" and "6" connect . The load does not heat at the moment and its temperature is going down. After the actual  measured temperature entry into the proportional band, the relay start opening and closing according to the controlling rule. The higher temperature , the shorter connecting time of relay between terminal "7" and "8 ", vice versa .The meter control the temperature by the way of changing the average heating power of load.


Our Company


FAQ

Q1: Why choose Trihero?
1.Trihero is a professional manufacturer that has focused on time control for many years.
2.Trihero provides complete certification, such as CE, ROHS, ISO and so on.
3.Trihero is strict accordance with the following points.
High quality - all of our products are produced according to international standard, we will provide full coordination to your QC testing if necessary.
Great service - a professional Service Team will be in charge of your order and help to solve your questions timely whether before or after you purchase.

Q2: How will you do the OEM?
We have own R&D team that involves 2 experienced structural engineers, 1 software engineer and 2 circuit engineers.
The OEM product will be accurately according to your requirement about function, printing, sticker, manual and box.
After the product has entered the market, you can send your feedback to our after-sale service team. Our R&D team will adjust and improve the product according to your feedback.

Q3: What is the MOQ for OEM?
Our MOQ for OEM is 200 pcs.

Q4: Can I have a sample order?
YES, we can provide a sample for FREE to test or check quality, you only need to pay the freight cost.

Q5: What is the MOQ for Trihero product?
There is no MOQ, we deal with any quantity of your order.

Q6: What is the payment term?
We accept T/T,  Western Union and paypal.

Q7: What is the delivery time?
It depends on the quantity.