DIN Rail Plastic Enclosure 60W 120VAC to 12VDC Switching Power Supply

• Output Type: Single
• Warranty: 2 Years
• Output Power: 51 - 100W
• Input Voltage: Full Range
• Connection Mode: Series Switching Power Supply
• Certification: CE, RoHS, ISO
• Model NO.: MDR-60-12
• Brand: Trihero
• Output Current: 5A
• Output Frequency: 50/60Hz
• Protection: Short Circuit & Overload
• Efficiency: 88%
• Origin: Zhejiang

Product Description

DIN rail plastic enclosure 60w 120vac to 12vdc switching power supply

 

Features:

1. AC input range selectable by switch

2. Protections: Short circuit / Overload / Over voltage / Over temperature

3. 100% full load burn-in test

4. Low cost, high reliability

5. 24 months warranty

 

MODEL		MDR-60-5	MDR-60-12	MDR-60-24	MDR-60-48
OUTPUT	DC VOLTAGE	5V	12V	24V	48V
	RATED CURRENT	10A	5A	2.5A	1.25A
	CURRENT RANGE	0 ~ 10A	0 ~5A	0 -2.5A	0-1.25A
	RATED POWER	50W	60W	60W	60W
	RIPPLE & NOISE (max.)	80mVp-p	120mVp-p	150mVp-p	200mVp-p
	VOLTAGE ADJ. RANGE	5 -6V	12-15V	24 - 30V	48 ~ 56V
	VOLTAGE TOLERANCE	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±1.0%	±1.0%	±1.0%	±1.0%
	LOAD REGULATION	±1.5%	±1.0%	±1.0%	±1.0%
	SETUP, RISE TIME Note.5	500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	50ms/230VAC 20ms/115VAC at full load
INPUT	VOLTAGE RANGE	85 - 264VAC 120-370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	78%	86%	88%	87%
	AC CURRENT (Typ.)	1.8A/115VAC 1A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 30A/115VAC,60A/230VAC
	LEAKAGE CURRENT	<1mA/240VAC
PROTECTION	OVERLOAD	105 - 150% rated output power
		Protection type: Constant current limiting, recovers automatically after fault condition is removed
	OVERVOLTAGE	6.25-7.25V	15.6 - 18V	31.2-36V	57.6 - 64.8V
		Protection type: Shut down o/p voltage, re-power on to recover
FUNCTION	DC OK SIGNAL	Relay contact rating (max.): 30V/1A resistive
ENVIRONMENT	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85°C, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 - 50°C)
	VIBRATION	Component: 10 - 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY &EMC	SAFETY STANDARDS	UL508, UL60950-1, TUV EN60950-1 approved
	WITHSTAND VOLTAGE	l/P-0/P:3KVAC l/P-FG:2KVAC 0/P-FG:0.5KVAC
	ISOLATION RESISTANCE	l/P-O/P, l/P-FG, 0/P-FG:>100M Ohms/500VDC/25°C/70% RH
	EMC EMISSION	Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
	EMC IMMUNITY	Compliance to EN6100(M-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
OTHERS	MTBF	299.2K hrs min. MIL-HDBK-217F (25°C)
	DIMENSION	40*90*100mm (W*H*D)
	PACKING	0.33Kg; 60pcs/20Kg/0.82CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.
	4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies.
	5. 5.Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.