D-60A 60W Dual Output Switching Power Supply 5V 5A, 12V 3A

Product Description

D-60W Dual output switching power supply

Features: 
High efficiency, high reliability 
For AC power supply input global 
100% full load and machine test 
Protection characteristics: short circuit/overload/pressure 
Has the boot display (light emitting diode (led) 
Air cooling 
Working frequency 54 KHz 
1 year warranty 
Size: 159 * 97 * 38 mm (L * W * H) 
 

model		D-60A		D-60B
		CH1	CH2	CH1	CH2
output	Dc output voltage	5V	12V	5V	24V
	Output voltage tolerance	±2%	±6%	±2%	±5%
	Rated output current	4A	3A	3A	1.8A
	Output current range	0.3-6A	0.2-4A	0.3-6A	0.2-2.2A
	Output power	56W		58W
	Ripple and the noise	75mVp-p	150mVp-p	75mVp-p	150mVp-p
	Dc voltage adjustable scope	CH1: -5%,+10%		CH1: -5%,+10%
	Start, rise, keep time	300ms,50ms ,80ms/230VAC 800ms,50ms,10ms/115VAC Loaded with
input	Input voltage range	85~264 VAC/ 47~63 Hz; 120~370VDC
	Exchange input current	2A/115 V 1A/ 230 V
	efficiency	73%		76%
	Impulse current	Cold start current 30A/115VAC 60A/230VAC
	Leakage current	<3.5mA/240VAC
Protection characteristics	Overload protection	105%~150%
		Protection way: current limiting, automatic recovery
	Overvoltage protection	115%~135%
		Protection way: hiccups, auto recovery mode
environment	Working temperature, humidity	-10ºC~+60ºC;20%~90 %RH
	Keep temperature, humidity	-20ºC~+85ºC;10%~95 %RH
	Vibrate resistance	10 ~ 500 Hz ac, 2 G 10 min. / 1 cycle time, 60 minutes, the axis
security	Compression sex	3: KVAC between input and output input and ground: 1.5KVAC Output and to :0.5KVAC
	Insulation resistance	Between the input and output, the input and output, and ground: 100M Ohms/500VDC
Standards	Safety standards	UL1012 , UL60950 ,EN60950
	EMC standard	Accord with EN55022(CLSPR22),EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024
other	weight	0.54Kg
	packaging	30pcs/16.7Kg/0.99CUFT
note	All the parameters in has not specified, all is in 230 VAC voltage input, rated load and 25 ºC conditions measuring income value. Ripple and noise voltage is in 20 MHz bandwidth oscilloscope take 12 inches twisted pair end with 0.1 mu and 47 u when capacitance measurement. Tolerance is voltage setting error, the voltage adjustment rate and adjust the sum total of the current rate. The power to consider as a device installed in final equipment, this equipment must be to make sure it's EMC index. Specific output current see output drop forehead curve.